ES B12S-G1031

Higher Reliability and Better Performance:

2.5-inch drives are designed for environment requiring higher reliability and higher I/O density. The benefits of 2.5" drives are obvious:

1. 70% smaller: Think about the estimated $1000 cost per square foot in an average data center. Now you can install 2.5 times of drives in the same data center footprint.
2. Consumes 40% less power: In addition to cost reduction, less power means a cooler enclosure, and therefore a higher overall reliability.
3. Higher MTBF: High-end 15,000RPM 2.5-inch SAS drives feature a 1.6 million hour MTBF, which is 15 percent higher than the 1.4 million hour by 3.5-inch disk drives.

2.5-inch Drives Are Simply Smaller:

Infortrend is the first to introduce 2.5" drives in external RAID enclosures. Using 2.5" drives allow you to implement more spindles in less than half of rackmount space than using the 3.5" counterparts. More spindles mean higher IOPS performance.

Higher IOPS in Less than half of space:

Lower Total Cost of Ownership:

Compact in Size:

SFF 2.5-inch drives are simply smaller than their 3.5-inch counterparts. That means more drives can be integrated in the disk array enclosures. For example, an Infortrend's B12S 1U enclosure houses 12 2.5-inch drives while the same number of 3.5-inch drives requires a 2U-profile enclosure. This density edge dramatically improves space utilization efficiency.

Power Consumption and Heat Generation:

SFF 2.5-inch drives consume 45% less power than their 3.5-inch counterparts. They run cooler with reduced airflow requirements, which also decrease the chance of encountering thermal issues and the cost on providing airflow ventilation.

Less Vibration When Spinning:

Spinning multiple drives in a RAID enclosure can introduce interference from the seek acceleration by one drive seeking data to another that is writing. The transmitted vibration can cause retries and hence the overall array performance can be affected. In a high-transaction rate and random-access environment with intensive seek operations, the potential performance loss can be mended by 2.5-inch drives. 2.5-inch drives do not generate sufficient vibration during seeks to degrade the overall performance.

Full-featured RAID in a Compact 1U Chassis:

The B12S RAID enclosure is designed with all the sophisticated high availability features including redundant RAID controllers, a passive backplane, cross-controller sync. cache channels, redundant cooling and power supply modules. Highest performance density is achieved within the compact design which previously requires 2U or more rack space.

Thanks to the low vibration and reduced airflow requirements of 2.5-inch drives, the B12S runs with higher reliability. As a reminder, the B12S does not compromise on its advanced RAID functionality because of its compact size. The B12S supports RAID levels 0, 1, 3, 5, 6, multi-level logical volumes, and all the renowned firmware functionality as other EonStor series models.

Scalability: Expansion over SAS Wide Links:

Similar to Fibre Channel expansion loops, SAS expander technologies also enable the ease of connections when the need arises for more capacity. All you have to do is to attach the cables and use a flatblade screwdriver to select an enclosure ID by a rotary switch. The SAS WWN addresses will be automatically applied to all the drives.

A single-controller RAID can attach to 4 expansion enclosures (60 HDD in total) via SAS wide links.

A redundant-controller RAID can attach to 3 expansion enclosures. Although the maximum no. of drives is reduced to 48, yet fault-tolerant links can be strung between RAID and JBOD enclosures.

Wider Links with Many Folds of Bandwidth:

With 4.3Gbps physical links combined into a multi-lane wide link, a host or expansion port is capable of a 1200MB/s bandwidth. That is also more abundant than a Fibre Channel dual-loop.

Flexible Tiered Storage with SAS Drives

We grant users the flexibility to intermix SAS disk drives and SATA SSDs in the B12S RAID and the B12S-J1000 1U expansion enclosures for a tiered storage environment: higher-performance and reliable SAS drives and SSDs for critical and I/O-intensive access, while large SATA disk drives for less-critical data, archive, or D2D backup. In addition to B12S-J, the B12F RAID series also supports a variety of expansion enclosures in 2U or 3U profiles, which support SATA drives.

Model	1U JBOD (SAS HDD)	2U JBOD (SATA HDD)	3U JBOD (SATA HDD)	Configuration
B12S-R1030	B12S-J1000-R	S12S-J1002-R	S16S-J1000-R	Dual-controller; fault-tolerant paths
B12S-G1030/G1031	B12S-J1000-S	S12S-J1000-G	S16S-J1000-S	Single-controller; single path
NOTE: Connections to the 2U S12S-J1000-G or 3U S16S JBODs require SFF-8088 to SFF-8470 cables.

Click here to see an overview of the supported or unsupported configurations.

A cabling guide is available through our sales representatives. You may also find cabling details in user's documentation.

Total Capacity with Expansion:

Max. Capacity Configuration - using 64 SATA HDDs in single-controller JBOD

- or -

Fault Tolerance Configuration - using 12 SATA SSD + 36 SAS HDD or 48 SAS HDD in dual-controller JBOD

Scalability:

1. Redundant-controller RAID - 3 JBOD
2. Single-controller RAID - 4 JBOD
3. 1U JBOD - Up to 4 JBOD for a total of 60 HDD
4. 2U JBOD - Up to 4 JBOD for a total of 60 HDD
5. 3U JBOD - Up to 4 JBOD for a total of 76 HDD

RAID levels:

RAID level 0, 1(0+1), 3, 5, 6, 10, 30, 50, 60; arrays of different RAID levels can co-exist in a configuration.

Host connectivity:

1. B12S-R1030 - 4 SAS multi-lane SFF-8088
2. B12S - G1030/B12S-G1031 - 2 SAS multi-lane SFF-8088

Drive connectivity:

1. 12 SAS HDD or SATA SSD via a passive backplane
2. Drive-side expansion via SAS multi-lane SFF-8088 per controller

Enclosure dimensions:

Rackmount size 1U

Dimensions	Without Chassis Ears	With Chassis Ears
Height	43.5mm (1.71 inches)	43.5mm (1.71 inches)
Width	444.8mm (17.5 inches)	483mm (19 inches)
Length	497.8mm (19.6 inches)	500.6mm (19.7 inches)

Package dimensions: 780 x 590 x 240mm

System weight: Gross weight - 20.42kg; Net weight - 13.36kg

Electrical:

Input Voltage	B12S-R1030/B12S-G1030 115VAC @ 6A 230VAC @ 3A with PFC (auto-switching) B12S-G1031 100VAC @ 6A 240VAC @ 3A with PFC (auto-switching)
Frequency	47 to 63Hz
Power Consumption	B12S-R/G1030: 380W (max.) B12S-G1031: 250W (max.)

Environmental:

Humidity	Operating: 5% to 90% (non-condensing) Non-operating: 5% to 95% (non-condensing)
Temperature	Operating: 0° to 40°C (32°F to 104°F) 0° to 35°C (32°F to 95°F, if BBU is applied) Non-operating: -40° to 60°C (-40°F to 149°F)
Altitude	Operating:3,658m (12,000 ft.) Non-operating:12,192m (40,000 ft.)
Shock (Half-sine)	Operating: 5G, half-sine, 11ms pulse width Non-operating: 15G, half-sine, 11ms pulse width Package: 60G, half-sine, 11ms pulse width
Vibration	(Random) Operating: 5 to 500Hz, 0.25Grms, X/Y/Z Sine Non-operating: 5 to 500Hz, 1.88Grms, X/Y/Z Sine (Sine) Operating: 5 to 500Hz, 0.2Grms, X/Y/Z Sine, 30min/sweep Non-operating: 5 to 500Hz, 1.0Grms, X/Y/Z Sine, 30min/sweep
Acoustic Noise	65dBA boundary, 60dBA normal

Regulatory:

1. IEC 60068-2
2. MIL-STD-810E/883E
3. ISTA
4. ASTM-D3332
5. IPC-TM-650
6. IEC 1000-4
7. IEC 1000-3-2, IEC 1000-3-3
8. ISO 7779/3744
9. RoHS
10. Microsfot WHQL-Windows Server 2003

EMC

1. CE
   1. EN 55022: 1998/A1: 2000/A2: 2003
   2. EN 61000-3-2: 2000/A2: 2005
   3. EN 61000-3-3: 1995/A1: 2001
   4. EN 55024: 1998/A1: 2001/A2: 2003
2. FCC (FCC Part 15, subpart B)
3. BSMI (CNS 13438)

Safety

1. UL (60950-1: 2003)
2. BSMI
   1. CNS 14336: 1993
   2. IEC 60950-1, First Editio

Spare Parts

	IFT-9ACETRAY	Drive tray, 2.5" disk
	IFT-9271CPSU	Power supply module, for ES Cube/8-bay and ES 1U/12-bay Generic subsystems, 250W capacity (for B12S-G1031)
	IFT-9ACPSU	Power supply module, for ES 1U/12-bay subsystems, 380W capacity
	IFT-9ACFanMod	Cooling fan module, for ES 1U/12-bay subsystems
	IFT-9ACBTE (R1030)	Battery cell pack, Li-Ion, for EonStor 1U/12-bay series subsystems, BBU ID
	IFT-8ABS10RE12	SAS to SAS RAID controller module, for ESB12S-R1030 subsystem, 2 X SAS SFF-8088 host connector, SAS Exp.
	IFT-8ABS10RE12M5	SAS to SAS RAID controller module, for ESB12S-R1030 subsystem, 2 X SAS SFF-8088 host connector, SAS Exp. 512MB DDR RAM
	IFT-8ABS10GE12	SAS to SAS RAID controller module, for ESB12S-G1030 subsystem, 2 X SAS SFF-8088 host connector, SAS Exp.
	IFT-8ABS10GE12M5	SAS to SAS RAID controller module, for ESB12S-G1030 subsystem, 2 X SAS SFF-8088 host connector, SAS Exp. 512MB DDR RAM
	IFT-8ABS10GE12C	SAS to SAS RAID controller module, for ES B12S-G1031 subsystem, 2 x SAS 4x host connectors, SAS Exp.
	IFT-8ABS10GE12CM5	SAS to SAS RAID controller module, for ES B12S-G1031 subsystem, 2 x SAS 4x host connectors, SAS Exp. 512MB DDR RAM
	IFT-DDRESCEM5	512MB DDR RAM DIMM module for ASIC400 Platform.
	IFT-9270CmSASCab2	SAS external cable, SAS 4x to 4x (SFF-8088), 120cm
	IFT-9ACLCD	LCD keypad panel, Type-I panel, for ES 1U/12-bay subsystems
	IFT-9011	Null Modem, DB9 female to DB9 male, wires swapped
	IFT-9270ASCab (G1030/G1031)	RS-232C serial cable, audio-jack to DB9
	IFT-9270AYCab (R1030)	Serial port cable for dual-controller subsystems, 2 audio jacks -to- 1 DB-9 Y-cable
	IFT-9ACFANG	Fan module interface board, for ES 1U/12-bay single controllersubsystems

Accessories

	IFT-9ACBT	Battery cell pack, Li-Ion, for ES 1U/12-bay series subsystems, BBU ID
	IFT-9AS1DT2S1S	Drive tray (2.5" HDD, Type-II handle and Type-II bezel), 2 SAS-to-1 SATA (SATA-II) MUX conversion, active-active port selector embedded, dual-controller subsystems
	IFT-9270CmSASCab4	SAS external cable, SFF-8088 to SFF-8470(thumbscrew type), 120 Centimeters
	IFT-9277CSlider36	Slide rail assembly, for ES 1U/4-bay subsystem, 24"~36" rack depth
	IFT-DDRESCMA	1GB DDR DIM module for all EonStor subsystems
	IFT-DDRESCMB	2GB DDR DIM module for all EonStor subsystems
	IFT-9270CUPSCab	UPS cable, audio-jack to DB9
	IFT-9270CUPSYCab	Serial port cable to UPS device for dual-controller subsystems, 2 audio jacks -to- 1 DB-9 Y-cable